dai-ly-ion-science-vietnam-ion-science-viet-nam-fire-investigation-kit.png

Đại lý ION Science Vietnam, ION Science Việt Nam, Fire Investigation Kit ION Science Vietnam, Bộ công cụ điều tra cháy ION Science Việt Nam

The ION Science Fire Investigation Kit with Tiger or Tiger LT photoionisation detector (PID) has been specifically designed to provide you with all the tools for a convenient, easy-to-use solution for the detection of volatile organic compounds (VOCs) within Fire and Arson Investigation applications.

In suspected arson cases, it is part of the investigation to prove that there is no other cause of the fire. The Fire Investigation Kit can be used to detect hydrocarbon compounds such as those found in petrol, alkanes, and cycloalkanes. Fire investigators including the police, consultants and private investigators acting on behalf of insurance companies, will search for every type of fire accelerant such as grill lighters, lighter fuel, liquid glue and cleaning agents.

Specification
Value
Minimum Resolution* 1 ppb or 0.001 mg/m3
Maximum reading** 20,000 ppm or 20,000 mg/m3
Response time T90 < 2 seconds
Accuracy***

± 5 % display reading ± one digit

Intrinsically safe approvals

II1GExiaIICT4Ga

Tamb = – 15 °C ≤Ta ≤ +45 °C (with lithium ion battery pack)

Tamb = – 15 °C ≤Ta ≤ +45 °C (with alkaline battery pack)

ITS09ATEX26890X IECEx ITS 10.0036X

3193491 conforms to UL Std. 913, 61010-1 & Certified to CAN/CSA Std. C22.2 No. 61010-1

Class 1 Division 1. Approval for Groups A, B, C & D, T4

Battery Life

Li-ion: life up to 24 hours, charge time 6.5 hours

Alkaline: 3 x AA, typically 8.5 hours life

Lamps

10.6 eV Krypton PID lamp (standard.) 10.0 eV and 11.7 eV lamps available

Data Logging* 120,000 data log points including date and time stamp
Communication Direct USB 1.1
Calibration 2 and 3 point calibration (via calibration kit accessory)
Alarm

Flashing LEDs Amber (low alarm) Red (high alarm)

Sounder 95 dBA at 300 mm (12″)

Vibration on alarm

Pre-programmed TWA and STEL*

Flow Rate ≥ 220 ml/min (with blocked flow alarm)
Temperature

Operating: -20 to 60 °C, -4 to 140 °F (non intrinsically safe)

Humidity: 0 – 99 % RH (non condensing)

Protection

Designed to IP65 (heavy rain)

EMC tested to EN61326- 1:2006, EN50270:2006 & CFR 47:2008 Class A

Weight & Dimensions

Instrument with probe: Width: 340 x Height: 90 x Depth: 60 mm (13.4 x 3.6 x 2.4”)

Standard case: 367 x 89 x 90 mm (14.45 x 3.54 x 2.36”)

Instrument weight: 0.72 kg (1.56lb)

Packed weight: 5 .5kg (12lb)

Xem thêm thiết bị Tại Đây