ULTRASONIC FLOW METERS FOR COMPRESSED AIR AND NITROGEN TRZ100D-C/4P TRZ150D-C/4P TRZ200D-C/4P AICHI TOKEI VIET NAM AICHI TOKEI Vietnam Đại lý AICHI TOKEI tại Việt nam
Hãng sản xuất: AICHI TOKEI VIET NAM
Mr. TúFeatures
A cost effective ultrasonic flow meter specialized for measuring air is now available!
It has realized a wide range of measuring ability and ZERO pressure loss using the characteristics of ultrasonic waves. It is also well-equipped to handle dust and mist and has excellent durability compared with conventional flow meters that use other measuring principles because it does not have moving parts.
The meter can be selected from two types of power sources: built-in batteries that run 10 years without needing power construction, or an external power supply (24 VDC).
・To understand and visualize the usage of compressed air as a measure of saving electric power.
Specifications
| Model | External power specifications | TRZ100D-C/4P | TRZ150D-C/4P | TRZ200D-C/4P |
|---|---|---|---|---|
| Built-in battery specifications | TRZ100-C/4P | TRZ150-C/4P | TRZ200-C/4P | |
| Diameter (Nominal diameter) | 100A | 150A | 200A | |
| Power source | External power specifications | 32-18. 24 VDC ± 10%; Power consumption: 1.1 W or less | ||
| Built-in battery specifications | Lithium battery with a battery life about 10 years (under an environmental temperature of 20°C) | |||
| Measurable Fluids | Air (mainly the air in a factory) | |||
| Fluid temperature and humidity | - 10 to 60°C, 90% RH or less | |||
| Operating pressure | Less than 0 to 1 MPa (Gauge pressure) | |||
| Flow rate range (Actual flow) | ±10～500m3/h | ±24～1200m3/h | ±40～2000m3/h | |
| Flow measurement accuracy | ±2%RS | ±50～500m3/h | ±120～1200m3/h | ±200～2000m3/h |
| ±5%RS | ±10～50m3/h | ±24～120m3/h | ±40～200m3/h | |
| Low flow rate cut-off | ±2.6m3/h | ±5.0m3/h | ±9.0m3/h | |
| Normal conversion accuracy | ± 2% (300 kPa or more) | |||
| Display (Switched by buttons) | Model | LCD 7 segments (with unit and alarm displays) | ||
| Main display | [Forward flow display mode] Accumulated flow rate: 0000000000 (Nm3/h) in 10 digits Trip accumulated flow rate: 000000000 (Nm3/h) in 9 digits Instantaneous flow rate: 0000000 (NL/min) in 7 digits [200A: × 10] |
|||
| [Forward and reverse flow display mode] Forward accumulated flow rate: 0000000000 (Nm3/h) in 10 digits Reverse accumulated flow rate: -000000000 (Nm3/h) in 9 digits Instantaneous flow rate: 0000000 (NL/min) in 7 digits [200A: × 10] |
||||
| Sub display | Instantaneous flow rate: 000.00 (Nm3/h, less than 200 Nm3/h) in 5 digits 0000.0 (Nm3/h, 200 Nm3/h or more and less than 2000 Nm3/h) in 4 and 1/2 digits 00000 (Nm3/h, 2000 Nm3/h or more) in 5 digits [200 A × 10] |
|||
| Pressure: 0000.0 kPa in 5 digits Temperature: 00.0°C in 3 digits |
||||
| Output | Current output | 4 to 20 mA (± 0.5% FS), Load resistance 400 Ω or less, Upper output current 22 mA Select the output from the instantaneous flow rate, pressure and temperature by pressing a button.A separate power supply (24 VDC ± 10%) is necessary if you use the meter of the built-in battery specifications. *1 |
||
| Output range (4 to 20 mA): Instantaneous flow rate 0 to ☐☐☐☐ Nm3/h (forward flow display mode) – ☐☐☐☐ to ☐☐☐☐ Nm3/h (Forward and reverse flow display mode) ☐☐☐☐ is the values set by a button. |
||||
| Pressure: 0 to 1000 kPa Temperature: -10 to 60°C |
||||
| Contact output | Two open-drain output system Maximum load: 24 VDC, 10 mA Maximum frequency: 10 Hz Duty: 35% to 65% |
|||
| Output 1: Unit pulse (Forward flow) Output 2: Unit pulse (Reverse flow) Flow rate upper and lower limits alarm Selection of telegram output |
||||
| Pulse output units: 1 Nm3/P or 10 Nm3/P | ||||
| Connection method | JIS 10K flange | |||
| Mounting position | Horizontal (LCD display to be placed upward), or vertical mounting | |||
| The materials exposed to gases | Stainless steel alloy, PPS, fluorosilicone rubber, etc. | |||
| Mass | External power specifications | 10.3kg | 18.3kg | 24.4kg |
| Built-in battery specifications | 10.5kg | 18.5kg | 24.6kg | |
| Installation location | Indoor and outdoor (The safety class IP64 qualified) | |||
| Storage temperature | -20 to 70°C, No condensing | |||
| Regulatory compliance | CE marking compliant (EN 61000- 6-2:2005 and EN 61000- 6-4: 2007) | |||
*1:In the actual flow measurement setting, the digits of the accumulated flow rate display, instantaneous flow rate display and pulse output vary.
*2: When displaying the instantaneous flow (NL /min), the main display (accumulated flow rate), sub-display (instantaneous flow rate [Nm3/h]), pressure (kPa) and temperature (°C) will not be displayed.
* Piping conditions:
20D or higher in upstream and 5D or higher in downstream for the 25A/32A models. (When using in the forward and reverse display mode, 20D or higher on both sides.)
10D or higher in upstream and 5D or higher in downstream for the 40A or larger models. (When using in the forward and reverse display mode, 10D or higher on both sides.)
For more information, please contact our sales and branch offices.
Conversion chart between actual and normal flow rates
| Conversion conditions | 100A | 150A | 200A | ||||
|---|---|---|---|---|---|---|---|
| Temperature (°C) | Gauge pressure (MPa) | Minimum | Maximum | Minimum | Maximum | Minimum | Maximum |
| Actual flow rate (m3/h) | 10 | 500 | 24 | 1200 | 40 | 2000 | |
| 20 | 0.7(Nm3/h) | 74 | 3680 | 180 | 8840 | 290 | 14700 |
| 30 | 0.5(Nm3/h) | 53 | 2670 | 130 | 5420 | 210 | 10700 |
| 0.7(Nm3/h) | 71 | 3550 | 170 | 8550 | 290 | 14250 | |
Dimensions
(Unit: mm)
| Model | W | H | φ D | Mass |
|---|---|---|---|---|
| TRZ100-O | 250 | 280 | 210 | 10.5 kg (1. Built-in lithium battery model) 10.3 kg (2 External power supply model) |
| TRZ150-O | 300 | 341 | 280 | 18.5 kg (1. Built-in lithium battery model) 18.3 kg (2 External power supply model) |
| TRZ200-O | 350 | 391 | 330 | 24.6 kg (1. Built-in lithium battery model) 24.4 kg (2 External power supply model) |
