TM591-B00-G00, Bộ hiển thị độ rung, PROVIBTECH Vietnam, Vibration indicator TM591-B00-G00, TM591-B00-G00 PROVIBTECH Việt Nam, Đại lý PROVIBTECH Vietnam

Pitesco Việt Nam là công ty XNK hàng đầu và là nhà cung cấp chuyên nghiệp các mặt hàng “Máy móc và các thiết bị, dụng cụ đo lường, kiểm tra công nghiệp”

 Hãy liên hệ với chúng tôi để có giá tốt nhất.

0961672728 Mr Thoát

I email I           thoat@pitesvietnam.com
I website 1I     http://fairchild-vietnam.pitesco.com/

I website 2I     http://tudonghoasg.com.vn/

Chúng tôi rất mong được hợp tác thành công với quý khách !

★ Monitor the absolute vibration of rotating machinery, such as casing vibration, bearing vibration, and frame vibration. 
★ Monitor vibrations due to rotor imbalance, misalignment, loose parts, rolling bearing damage, gear damage, etc. 
Measurement parameters 
★ Speed, acceleration, and displacement values ​​of vibration. 
Unit type 
★ Various rotating machinery. Such as fans, compressors, motors, pumps, gearboxes, turbines, etc. 
★ Especially suitable for the technical transformation of the old unit. 
Probe installation requirements 
★ Only need to make a φ30mm platform on the casing, open a M6 screw hole, and fix the probe on the screw hole without any operation on the inside of the machine. 
Output interface 
★ With 4-20mA or 1-5V active output terminals ("4" and "-" for "4-20mA"). 
★ The on-site LED shows the machine running status (instrument working status OK, alarm Alert, interlocking Danger). 
★ Isolated relay output terminal SPDT of two-level alarm ("ALERT" and 6 output terminals of "DANGER").
★ Field alarm reset button, remote alarm reset terminal ("RESET") / alarm bypass terminal ("RESET" and "COM"). 
★ It can be displayed on the spot (requires TM0200) and the vibration value is displayed by PLC and DCS. 
★ Suitable for all kinds of explosion-proof occasions (explosion-proof barrier TM0401 is required). 
★ Buffered output of the original signal, direct docking status monitoring instrument ("BUF OUT" coaxial cable interface). 
★ 24VDC, 220VAC or 110VAC power supply, of which 220VAC or 110VAC option is isolated power.
Technical indicators 
Electrical indicators 
External power supply (Power): 
22-30VDC, 100mA, the host computer power supply or use TM900; 
90 ~ 220VAC power supply, 40 ~ 60Hz, 50mA. 
Frequency response: (±3dB) 
Acceleration: 2.0Hz-5KHz; 
Speed: 10.0Hz-3KHz; 
Displacement: 10Hz-3.0KHz; 
Acceleration (low frequency option): 1.0Hz-100Hz 
speed (low frequency option): 1.5Hz-100Hz; 
Displacement (Low frequency option): 2.0Hz-100Hz. 
External sensor sensitivity (Sensor): 
100 mV/g, 500mV/g accelerometer; 
4.0mV/μm/s, speed sensor. 
External sensor: 
24VDC, 4mA constant current. 
Terminal: 
“A/P” terminal: Connect red cable; 
“B/S” terminal: Connect white cable. 
Buf Out: 
The output of the original signal. 
DC offset: 10VDC; 
output impedance: less than 500Ω 
maximum transmission distance: 300 meters. 
Sensitivity: Same as the sensor. 
Total vibration output (4-20mA): 
4-20mA, active, driving 750Ω load; 
1-5V, active, output impedance 250Ω. 
Alarm point setting (Normal/Set): 
Range: 0-100% of full scale;
Accuracy: ±0.1%. 
Alarm Gain: >60dB 
Alarm Relay (Alert/Danger): 
Seal: Epoxy. 
Node capacity: 2A/220VAC or 2A/24VDC; resistive load. 
Alarm delay: 3 seconds 
node type: single pole double throw, SPDT. 
Output isolation: 1000VDC. 
Operation status Photocell LED indication: 
Green light: The system self-test passes, the instrument works normally; 
yellow light: alarm indication; 
red light: interlock indication. 
Alarm reset / alarm bypass (RESET): 
monitoring table built-in alarm reset button; 
remote alarm reset / alarm bypass terminal ("RESET"). 
Physical index 
shape: 
size: height: 75mm, other dimensions see TM table size chart; 
weight: 500g 
environmental indicators 
operating temperature: -250C to +650C 
storage temperature: -400C to +1000C. 
Humidity: 90% non-coagulated. 
Ordering Guide 
Standard Configuration: 
TM101 Vibrating Table: 
TM101-A06-B00-C00-D00-E00-G00-H00 
Accelerometer Kit: 
TM0782A-KM 
TM101 Ordering Options: 
TM101-AXX-BXX-CXX-DXX-EXX-GXX-HXX 
AXX: full scale
A00: 
0-200μm pk-pk A01: 0-500μm pk-pk 
A02: 0-100μm pk-pk 
A03: 0-10mil pk-pk 
A04: 0-25mil pk-pk 
A05: 0-5.0mil pk-pk 
A06 *: 0-50mm/s rms 
A07: 0-100mm/s rms 
A08: 0-20mm/s rms 
A09: 0-2.0ips rms 
A10: 0-4.0ips rms 
A11: 0-1.0ips rms k 
A12: 0- PK 5.0 g. 
the A13: PK 0 - 10 g. 
the A14: 0 - 5.0 g PK (0.5-100Hz). 
A15: 0 - 10 g PK (0.5-100Hz). 
A16: 0-50mm / S RMS (1.5-100Hz and TM0793V Or PT079VD package). 
A17: 0-100mm/s rms (1.5-100Hz is compatible with TM0793V or PT079VD). 
A18: 0-500μm pk-pk (2.0-100Hz is compatible with TM0793V or PT079VD). 
A19: 0-200μm pk- Pk (2.0-100Hz with TM0793V or PT079VD). 
 
A20: 0-2.0ips rms (1.5-100Hz) 
A21: 0-4.0ips rms (1.5-100Hz)
A22: 0-20mil pk-pk (2.0-100Hz is compatible with TM0793V or PT079VD). 
A23: 0-10mil pk-pk (2.0-100Hz is compatible with TM0793V or PT079VD). 
BXX: External power supply 
B00*: +24VDC 
B01: 220VAC 
B02: 110VAC 
B03: 90~250VAC 
CXX: Alarm output 
C00*: Epoxy sealed relay 
C01: No alarm 
DXX: Vibration output 
D00*: 4-20mA 
D01: 1-5V 
EXX: Buffer output 
E00*: Buffer of original signal Output 
E01: Unbuffered output 
GXX: Mount 
G00*: Rail mounting 
G01: Base plate mounting 
HXX: External sensor 
H00*: TM0782A or any acceleration sensor (sensitivity: 100mV/g) 
H01: TM0793V or any speed sensor 
(sensitivity: 4mV/mm /s) 
H99: Customized 
*: The default value for the system option, recommended. 
The TM101 accessory 
TM101 must be configured with an external acceleration or speed sensor kit to form the system. 
TM0782A-KM: Accelerometer kit. 
TM0782A-K -MS: Explosion-proof accelerometer.
TM0793V-KM: Speed ​​sensor kit. 
TM079VD Series: Low frequency speed/displacement sensor. 
TM900: Power converter. 
TM0200: 3-1/2 digital display meter. 
TM0302: NEMA enclosure. Can accommodate 2 TM watches. 
TM0306: NEMA enclosure. Can accommodate 6 TM watches. 
TM0401: Explosion-proof barrier. 
TM0312: Explosion-proof enclosure. Can accommodate 2 TM meters or 4 front-end devices. 
TM0314: Explosion-proof enclosure. Can accommodate 4 TM meters or 6 front-end devices.

TM 
101-A00-B00-C00-D00-E00-G00-H00 
TM101-A06-B00-C00-D00-E00-G00-H00 
TM101-A06-B00- C00-D00-E00-G00-H00 
TM101-A06-B00-C00-D00-E00-G00-H00 
TM101-A06-B01-C00-D00-E00-G00-H00 
TM101-A07-B00-C00-D00-E00 -G00-H00 
TM101-A07-B01-C00-D00-E00-G00-H00 
TM101-A08-B00-C00-D00-E00-G00-H00 
TM101-A08-B01-C00-D00-E00-G00-H00 
TM101 -A17-B01-C00-D00-E00-G00-H00 
TM0181-A85-B01 
TM0180-A08-B00-C07-D05 
TR4102-E03-G00-S01 
TR4101-A02-E03-G00-SO1 
TM0180-07-00- 10-10-02 
TM0180 φ8mm M10*1 
TM0180 φ8mm M10*1 
TM302-A00-B00-C00-D00-E00-F00 
TM0782A-KM 
TM101-A08-B00-C00-D00-E00-G00-H00
TM900-A00 
TM201 
TM202 
TM301-A02-B00-C00-D00-E00-F00-G00 
TM302-A02-B00-C00-D00-E00-F00-G00 
TM501-A02-B00-C00-D00-E00-F00-G00 
TM502-A02-B00-C00-D00-E00-F00-G00 
TR4101 
TR4102
TM0180-A08-B00-C05-D10 
TM0180-A07-B00-C05-D10 
TM0110-A00-B00-C05-D10
TM0181-A40-B00 
TM0181-A40-B01 
TM0181-A45-B00 
TM0181-A45-B01 
TM0181-A80-B00 
TM0782A-K 
TM0182-A50-B00 
TM0182-A50-B01 
TM0182-A90-B00 
TM0182-A90-B01 
TM0182- A91-B00 
TM0182-A91-B01

TM0393-A10-B00 
TM0393-A22-B00
TM301-AOO-BOO-COO-DOO-EOO-F00-G00 
TM101-A08-B01-C00-D00-E00-G00 
2: TM201 shaft vibration transmission protection table
TM201-A00-B00-C00-D00-E00-G00 
TM201-A00-B01-C00-D00-E00-G00 
TM201-A01-B00-C00-D00-E00-G00 
TM201-A01-B01-C00-D00-E00 -G00 
TM201-A02-B00-C00-D00-E00-G00 
TM201-A02-B01-C00-D00-E00-G00 
TM201-A06-B00-C00-D00-E00-G00 
TM201-A06-B01-C00-D00 -E00-G00 
TM201-A07-B00-C00-D00-E00-G00 
TM201-A07-B01-C00-D00-E00-G00 
TM201-A08-B00-C00-D00-E00-G00 
TM201-A08-B01-C00 -D00-E00-G00
3: TM202 shaft position / expansion differential protection table
TM202-A00-B00-C00-D00-E00-G00 
TM202-A00-B01-C00-D00-E00-G00 
TM202-A01-B00-C00-D00-E00-G00 
TM202-A01-B01-C00-D00-E00 -G00 
TM202-A02-B00-C00-D00-E00-G00 
TM202-A02-B01-C00-D00-E00-G00 
TM202-A03-B00-C00-D00-E00-G00 
TM202-A03-B01-C
TM301-A00-B00-C00-D00-E00-F00-G00 
TM301-A00-B00-C00-D00-E01-F00-G00 
TM301-A00-B01-C00-D00-E00-F00-G00 
TM301-A00-B01 -C00-D00-E01-F00-G00 
TM301-A01-B00-C00-D00-E00-F00-G00 
TM301-A01-B00-C00-D00-E01-F00-G00 
TM301-A01-B01-C00-D00- E00-F00-G00
TM301-A02-B00-C00-D00-E00-F00-G00 
TM301-A02-B00-C00-D00-E01-F00-G00 
TM301-A02-B01-C00-D00-E01-F00-G00 
TM301-A03-B00 -C00-D00-E00-F00-G00 
TM301-A03-B00-C00-D00-E01-F00-G00 
TM301-A03-B01-C00-D00-E00-F00-G00 
TM301-A03-B01-C00-D00- E01-F00-G00 
TM301-A06-B00-C00-D00-E00-F00-G00 
TM301-A06-B00-C00-D00-E01-F00-G00 
TM301-A06-B01-C00-D00-E00-F00-G00 
TM301-A06-B01-C00-D00-E01-F00-G00 
TM301-A07-B00-C00-D00-E00-F00-G00
TM301-A07-B01-C00-D00-E00-F00-G00 
TM301-A08-B00-C00-D00-E00-F00-G00
TM301-A08-B01-C00-D00-E00-F00-G00 
TM301-A08-B01-C00-D00-E01-F00-G00
5: TM302 shaft position transmission protection table
TM302-A00-B00-C00-D00-E00-F00-G00 
TM302-A00-B00-C00-D00-E01-F00-G00 
TM302-A00-B01-C00-D00-E00-F00-G00 
TM302-A00-B01 -C00-D00-E01-F00-G00 
TM302-A01-B00-C00-D00-E00-F00-G00 
TM302-A01-B00-C00-D00-E01-F00-G00 
TM302-A01-B01-C00-D00- E00-F00-G00 
TM302-A01-B01-C00-D00-E01-F00-G00
6: Shaft vibration protection table
TR4101-A00-E00-F00-G00-S00 
TR4101-A00-E01-F00-G00-S00 
TR4101-A01-E00-F00-G00-S00 
TR4101-A01-E00-F00-G00-S00 
TR4101-A01-E01- F00-G00-S00 
TR4101-A02-E00-F00-G00-S00 
TR4101-A02-E01-F00-G00-S00 qin 
TR4102-E00-F00-G00-S00 
TR4102-E01-F00-G00-S00 
TR4101-A00- E00-G00-S01 
TR4102-E00-G00-S01 
TR4101-A00-E00-G00-s00 
TR4102-E00-G00-s00
7: TM501 speed transmission monitoring table
TM501-A01-B00-C00-D00-F00-G00 
TM501-A01-B01-C00-D00-F00-G00 
TM501-A00-B00-C00-D00-F00-G00 
TM501-A00-B01-C00-D00-F00 -G00 
TM501-A02-B00-C00-D00-F00-G00 
TM501-A02-B01-C00-D00-F00-G00
 
TM502-A02-B00-C00-D00-E00-F00-G00 
TM502-A02-B01-C00-D00-E00-F00-G00 
TM502-A02-B00-C00-D00-E01-F00-G00 
TM502-A02-B01 -C00-D00-E01-F00-G00 
TM502-A00-B00-C00-D00-E00-F00-G00 
TM502-A00-B01-C00-D00-E00-F00-G00 
TM502-A00-B00-C00-D00- E01-F00-G00 
TM502-A00-B01-C00-D00-E01-F00-G00 
TM502-A02-B00-C00-D00-E00-F00-G00 
TM502-A03-B01-C00-D00-E00-F00-G00 
TM502-A03-B00-C00-D00-E01-F00-G00 
TM502-A03-B01-C00-D00-E01-F00-G00
9: Eddy current sensor monitoring module 
DTM10-A0-B0-C0-E00-S0 
DTM10-201-A0-C0-G0-I0-S0 
DTM10-202-A0-C0-G0-S0 
DTM10-301-A0-C0-E00 -G0-I0-S0
DTM10-502-A0-C0-E00-F00-G0-S0 
Intelligent Digital Case Vibration Monitoring Table: DTM20-A0-B0-I0-S0 
Intelligent Digital Case Vibration Monitoring Table: DTM20-101-A00-C0-G0- H0-I0-S0 
temperature module: DTM30-A 
communication module: DTM96-A0-B0-SO
DM504 
PDM1201 
PT2060/10/20/30/40/43/53/90/91/96/98/99 
PT2010/11/21/22/25/26/51/51D/53/62/90/91/92 /99 
PT500-ABC-DE 
VS102- ABCD-EFGG 
PT580- ABC-DEF-GGHI
Product details TM900 power supply
TM0793V vibration probe 
TM0393-A17-B00 vibration probe 
TM0180-A05-B05-C03-D10 eddy current axis displacement sensor shaft vibration probe front 
end TM0180-A05-B05-C05-D10 eddy current axis displacement sensor shaft vibration probe front end 
TM0180-A07-B00-C05-D05 eddy current axis displacement sensor shaft vibration probe front 
end TM0180-A07-B00-C05-D10 eddy current axis displacement sensor shaft vibration probe front 
end TM0180-A07-B00-C06-D10 Eddy current axis displacement sensor shaft vibration probe front 
end TM0180-A08-B00-C06-D10 eddy current axis displacement sensor shaft vibration probe front 
end TM0180-A08-B00-C05-D10 eddy current axis displacement sensor shaft vibration probe front end
10: Perlis PREDICTECH extension cable 
TM0181-A40-B00 extension cable 
TM0181-A40 
-B01 extension cable TM0181-A45-B01 extension cable
TM0782A-M/ TM0782A-E/ TM0782A-KM/TM0782A-KE/TM0782A-MS 
/TM0782A-ES/TM0782A-KMS/TM0782A-KES 
TM0783A-M/TM0783A-E 
TM0793V-M/TM0793V-E/TM0793V-KM/ TM0793V-KE/TM0793V-MS/TM0793V-ES 
/TM0793V-KMS/TM0793V-KES
12: TM0306 box 
TM0306