Mr. Tú
| Xem thêm thiết bị Tại đây |
Model: ST5491E
This indicating vibration transmitter and signal conditioner in a single package built to provide years of reliable service. The ST5491E is the ideal solution for sensing vibration on most plant equipment. A simple two-wire loop signal proportional to velocity is generated for transfer to a programmable logic controller (PLC), distributed control system (DCS) or other 4-20 mA input devices. Simply mount the transmitter on the machine case, connect the 2-wire loop and read and/or record the vibration. Each transmitter is manufactured the way you want it: one of 3 electrical connections, epoxy or hermetically sealed, mounting stud, frequency range, full scale output and level of certification.
Product Aprox. Weight: 0.8 kg (1.8 lbs)
Ordering code samples
ST5491E-022-410-00 Metrix Vietnam
ST5491E-022-020 Metrix Vietnam
ST5491E-022-020-00 Metrix Vietnam
ST5491E-022-020-00 Metrix Vietnam
ST5491E-023-020-00 Metrix Vietnam
ST5491E-022-410-00 Metrix Vietnam
ST-5491E-023-020-00 Metrix Vietnam
ST-5491E-022-520-00 Metrix Vietnam
ST5491E-022-0020-0-0 Metrix Vietnam
ST5491E-022-020-00 Metrix Vietnam
ST5491E-023-220-00 Metrix Vietnam
ST5491E-023-410-00 Metrix Vietnam
ST5491E-023-420-00 Metrix Vietnam
ST5491E-023-510-00 Metrix Vietnam
ST5491E-023-520-00 Metrix Vietnam
ST5491E-024-00-10-00 Metrix Vietnam
ST5491E-024-00-20-10 Metrix Vietnam
ST5491E-024-010-00 Metrix Vietnam
ST5491E-024-01-10-00 Metrix Vietnam
ST5491E-024-01-20-10 Metrix Vietnam
ST5491E-024-020-00 Metrix Vietnam
ST5491E-024-02-10-00 Metrix Vietnam
ST5491E-024-02-20-10 Metrix Vietnam
ST5491E-024-03-10-00 Metrix Vietnam
ST5491E-024-03-20-10 Metrix Vietnam
ST5491E-024-04-10-00 Metrix Vietnam
ST5491E-024-04-20-10 Metrix Vietnam
ST5491E-024-05-10-00 Metrix Vietnam
ST5491E-024-05-20-10 Metrix Vietnam
ST5491E-024-10-10-00 Metrix Vietnam
ST5491E-024-10-20-10 Metrix Vietnam
ST5491E-024-110-00 Metrix Vietnam
ST5491E-024-11-10-00 Metrix Vietnam
ST5491E-024-11-20-10 Metrix Vietnam
ST5491E-024-120-00 Metrix Vietnam
ST5491E-024-12-10-00 Metrix Vietnam
ST5491E-024-12-20-10 Metrix Vietnam
ST5491E-024-13-10-00 Metrix Vietnam
ST5491E-024-13-20-10 Metrix Vietnam
ST5491E-024-14-10-00 Metrix Vietnam
ST5491E-024-14-20-10 Metrix Vietnam
Cross reference list
| Competitive Product | Metrix Product | Notes |
| 12566337 | IT6810-001 | |
| R86973XY121-02000 | ST5484E-121-020-00 and 8200-002 if bold is XW then it will be 8200-001 | |
| IMI EX641B72 | ST5484E-123-032-22 | |
| 260 | CPN-BE-100 | |
| 16710-15 | 9334-211-0040-0045 | VIB SEN EXT CABLE 4,575mm WITH EX-I |
| 102044-00-38-10-02 | MX2030-01-000-038-10-05 | |
| 106765-04 | 8978-111-0040 | VIB SEN EXT CABLE 4,000mm WITH EX-P |
| 107770-02-01 | SV6300-551 plus 5499-001 and 8841-067 | |
| 107770-03-01 | SV6300-551 plus 5499-001 | |
| 12237-01 | MX2033-01-04-15-00 | |
| 130539-16 | 9334-211-0005-0050 | 16ft cable and 21" armor |
| 1442-PS-0503M0010N | MX2030-71-000-012-10-05 | Allen bradley probe. For others see document |
| 160 & 160E | SA6200A | this requires replacing cable and 440/450 |
| 162VTC-200-214-00 | ST5484E-123-214-00 | take exception to the 1.6 ips Pk-Pk |
| 162-VTRA-2 | 162VTS-235-00 | |
| 162VTRA-2-03 | 162VTS-126-036-00 | using 8253-002 adapter |
| 162VTRA-2-10 | 162VTS-126-036-00 | was a 3 pin connector but no longer avalable. |
| 162VTRA-3 | 162VTS-200-245-00 | |
| 162VTRA-3-9 | 162VTS-200-X45-00 | stud mount is special. Customer needs to give that information. |
| 162VTRAH-3-02 | 162VTS-200-035-00 | need to also order 8253-002 |
| 162VTRAH-3-12 | 162VTS-200-034 | |
| 162VTRAH-3-20-003 | 162VTS-200-235-00 | take exception to 3ft cable. |
| 162VTRAH-9 | ST5484E-121-120-00 | this requires the 1/2"NPT to be drilled and tapped for 1/4"-20 hole. Some will also need different scale ranges. |
| 162VTRAH-M12 | 162VTS-121-235-00 | |
| 16925-12 | 9334-211-0115-0120 | BN is a 3 wire cable |
| 177230-01-02-05 | ST5484E-121-18-3-4-0-2 | requires agency |
| 177230-01-01-00 | ST6917-121-XX | need to know exactly the stud mount and no area approvals. |
| 177230-02 | ST54854E-123-1X34-00 | will need to know exact stud mount and take exception to transmitter size difference. |
| 177230-01-01-05 | ST5484E-121-XX4-22 | need to know exactly the stud mount and type of area approvals. |
| 1800/01-90-02-05 speed transmitter | MX2033-01-01-09-05 with 9647 mounting plate | |
| 1800/15-11-90-01-00 | MX2034-01-01-09-00-01-021-00 | |
| 1800/15-12-90-01-00 | MX2034-01-01-09-00-01-022-00 | |
| 1800/15-12-90-02-00 | MX2034-01-01-09-00-01-022-00 with 9647 mounting plate | |
| 1800/15-03-90-01-00 | MX2034-01-01-09-00-01-003 | |
| 1800/20-11-90-01-00 | MX2034-01-01-09-00-02-050-00 | |
| 18745-03 | MX2033-01-02-05-00 | |
| 190501-01-00-00 | SV6300-550 | also would need the 3719-008 1/4"-28M to 3/8"-24 adapter |
| 190501-07-00-04 | SV6300-551 | also would need the 3719-008 1/4"-28M to 3/8"-24 adapter , we do not have a hex plate adapter |
| 190501-01-00-01 | SV6300-551 | also would need the 3719-008 1/4"-28M to 3/8"-24 adapter |
| 190-00 | 10009 | .190” TIP DIAMETER SERIES 3000 1/4-28 no armor |
| 190-01 | 10010 | .190” TIP DIAMETER SERIES 3000 1/4-28 armor |
| 190-04 | 10025 | .190” TIP DIAMETER SERIES 3000 3/8"-24 reverse mount no armor |
| 190-06 | 10011 | .190” TIP DIAMETER SERIES 3000 1/4-28 armor |
| 190-07 | 10012 | .190” TIP DIAMETER SERIES 3000 M8x1 no armor |
| 190-08 | 10013 | .190” TIP DIAMETER SERIES 3000 M8x1 armor |
| 18745-04 | MX2033-01-02-09-00 | |
| 20929-01 | MX2033-01-04-15-00 | |
| 21000-28-10-15-158-04-02 | 5497PM-004-M1002 | 24" sleeve |
| 21000-05-10-00-xx-04-02 | 5497PM-XXX | 1M probe |
| 21000-26-05-15-040-00-02 | 5497PM- | MX8030-06-005-030-05-05. tightview steup |
| 21000-16-05-00-096-00-02 | 5497PM- | 1/2m probe |
| 21022-28-10-114-02 | 5499-003 2ea per unit MX2030-05-002-012-10-05 | this is a dual probe housing. We do not have this so offer multiple 5499 set up. |
| 21500-00-08-10-02 | MX2030-71-000-080-10-05 10001-00-08-10-02 | |
| 21504-00-08-05-02 | 10005-00-08-05-02 | (3/8-24) (0.5 Meter Length)( 3in. probe body length)(8mm tip diameter) MX2030-01- |
| 21504-00-08-10-02 | 10005-00-08-10-02 | 3/8"-24 (1 Meter Length)( 3in. probe body length)(8mm tip diameter) MX2030-01 |
| 21508-02-12-05-02 | 10026-02-12-05-02 | MX2030-05-002-012-05-05 |
| 21508-02-12-10-02 | 10026-02-12-10-02 | MX2030-05-002-012-10-05 |
| 21747-040-00 | 7402-040-00 | MX2031-040-00-00 |
| 21747-045-00 | 7402-045-00 | MX2031-045-00-00 |
| 21747-085-00 | 7402-085-00 | |
| 21747-085-01 | 7402-085-01 | MX2031-085-01-00 |
| 22810-00-06-10-02 | 10008-00-06-10-02 probe alone. For system would be MX2030-04-000-060-10-05 | |
| 22811-00-12-05-02 | 1007-00-12-05-02 probe alone. For system would be MX2030-04-000-120-05-05 | |
| 23732-01 | 3 part set. 5535-107-1-09-100 signal conditioner, SA6200A 100mV/g accelerometer and 9334-211-xxxx-xxxx cable | will need cable length |
| 24701-28-10-15-028-03-02 | 3300XL 8mm, 1m, 1.5", 2.8" | 5499-002 with reverse mount MX2030-05-002-012-10-05 need extension cable depending on system length. |
| 24701-00-00-00-290-03-02 | 5499-004-M1002 | this is the probe sleeve assembly of 29". 5499-M1002 is only 24" |
| 24710-040-01 | 9282-040-00 | MX2031-040-01-00 |
| 24710-080-01 | 7402-080-01 | MX2031-080-01-00 |
| 26530-xx-xx-xx-xxx-xxx-xx-xx-xx | this is a dual probe/transducer set in a enclosure. | MX2030 reverse mount/5499 or 5497PM housing/ 5485C with 4850 cable. |
| 3115-2800-190 | MX2033-01-03-15-05 | |
| 3120-2800-300 | MX2033-01-04-20-05 | |
| 26180-00-08-10-02 | 10040-00-08-10 | |
| 30000-00-08-06-02 | 10014-00-80-06 | measured in inches |
| 3068-25 | ||
| 3068-21B | straight 1.3 long | |
| 31000-30-05-00-018-03-02 | MX2030-05-002-012-05-05 with 5499 probe housing | 3300 reverse mount probe sleeve housing |
| 32000-16-05-00-090-07-02 | MX2030-reverse mount probe and 5497PM probe housing | |
| 32000-28-10-00-240-03-02 | 5497PM-1-1-240-1-2 with the MX2030-06-005-030-010-05 | |
| 3300 XL NSv | MX2033-01-03-05-00 | 5 meter system |
| 3300 XL NSv | MX2033-01-03-07-00 | 7 meter system |
| 3300--33-5-0-0 | MX2034-01-01-05-00-00 | |
| 330100-50-00 | MX2033-01-01-50-00 | |
| 330100-90-05 | MX2033-01-01-90-05 | |
| 330101-00-12-10-01-00 | MX2030-01-000-012-10-00 | no armor |
| 330101-00-16-05-02-05 | MX2030-01-000-016-05-05 | no armor |
| 330102-00-24-10-02-00 | MX2030-02-000-024-10-00 | with armor |
| 330103-00-03-10-02-05 | MX2030-03-000-030-10-05 | no armor |
| 330104-00-08-10-02-00 | MX2030-04-000-080-10-00 | with armor |
| 330105-02-12-05-02-05 | MX2030-05-002-012-05-05 | |
| 330106-02-12-10-02-00 | MX2030-06-002-012-10-00 | |
| 330130-045-01-05 | MX2031-045-01-05 | |
| 330130-045-00-00 | MX2031-045-00-00 | |
| 330130-040-01-00 | MX2031-040-01-00 | |
| 330130-045-00-02 | MX2031-045-00-00 | |
| 330130-080-00-05 | MX2031-080-00-05 | |
| 330130-080-02-05 | MX2031-080-00-05 | |
| 330130-080-03-05 | MX2031-080-01-05 | |
| 330171-00-28-10-01-05 | MX2030-71-000-028-10-05 | |
| 330172-15-50-05-01-05 | MX2030-72-015-050-05-05 | |
| 330180-52-00 | mx2033-01-01-05-00 | no mounting hardware |
| 330180-50-00 | MX2033-01-01-05-00 | flat base mount and need this with order. 9647 |
| 330180-50-05 | mx2033-01-01-05-05 | flat base mount and need this with order. 9647 |
| 330180-91-00 | MX2033-01-01-09-05 with din rail mount | |
| 330192-00-28-05-05 | MX2030-02-000-028-05-05 | 3/8"24 with armor probe is for extended temperature |
| 330234-C5-02-05 | MX2031-080-00-05 | |
| 330400-01-05 | SA6200A-551 | 1/4-28 stud would need to change cabling to 2 wire as the B/N is 3 wire |
| 330400-02-05 | SA6200A-551 | 3719-010 stud size M8 / connector - 2 pin MIL |
| 330425-02-05 | SA6200A-051 | 3719-010 stud size M8 / connector - 2 pin MIL exception to sensitivity of 25 mV/g |
| 330500-01-00 | SV6300-051 | need 3719-033 1/2"-20 stud Take exception to the 3 pin connection |
| 330500-02-04 | SV6300-551 | need 3719-010 M8x1 stud Take exception to the 3 pin connection |
| 330500-02-00 | SV6300-051 | need 3719-010 M8x1 stud Take exception to the 3 pin connection |
| 330525-01- | SV6300and 3719-009 stud. | Replace cable also |
| 330703-000-040-10-01-05 | 10039-00-40-10-16-02 | 11mm probe series |
| 330704-002-052-10-02-0 | 10040-002-052-10-00 | 11mm probe series |
| 330730-040-01-00 | 9282-040-01 | 11mm probe series |
| 330730-080-03-05 | 9282-080-01 | 11mm probe series |
| 330750-080 | SV6350- or 5485C high temp sensor | |
| 330780-90-05 | 5533-114 | 11mm probe series |
| 330905-00-10-10-02-00 | MX2030-03-000-100-10-00 | TightView M10 thread. 00 unthreaded 100mm probe body 1m probe no area approvals. |
| 330908-XXX-XXX-XX-XX | MX8030-tight view system | 3/8"-24 without armor |
| 330909-10-70-05-01-00 | MX8030-02-010-070-05-00 | TightView, 3/8"-24 with armor |
| 330980-51-05 | MX | |
| 376-A1-CO | 440SR-2140-2020 | exception to the full scale range of ips verses G's start up dely(lockout) is for only 20 sec. |
| 376A-A3-E4 | 440DR-2122-2020 | exception to the full scale range of ips verses G's start up dely(lockout) is for only 20 sec. |
| 440S-0100-0000 | 440SR-2100-0000 | |
| 440SR-0020-000-00 | 440SR-2020-0000 | |
| 5166-07B | 5485C-001-010/8530-002/3719-033 or 5485-002/4850-010 and the mounting parts | |
| 5166-08 | 5485C-002 | |
| 5465-022 | MX2034-01-04-15-05-01-01 | temperature range is only 65C |
| 5465D-612 | MX2034-01-01-05-00-01-001 need to take exception to the adjustable open probe. This option is not available or needed for the MX2034 units. | |
| 5465E-101S | MX2034-01-04-05-05-01-003 | MX2034-01-04-05-05-01-003 |
| 5475C-03 | 5485C-008 | |
| 5484C-02 | ST5484E-121-020-00 | |
| 5484C-03 | ST5484E-123-1120-10 | |
| 5485C-03B | 5485C-008 | |
| 5488-008/108 | MX2034-01-01-09-05-02-051 | |
| 5488E101S | MX2034-01-02-05-05-02-051 | |
| 5491B-023 | ST5491E-023-020-00 | |
| 5509-231 | SW6000-2321-200 | |
| 5509-301 | SW6000-8021-350 | |
| 5520-001 | ST5484E depending on frequency of machine | |
| 5533-103 | MX2033-08-02-05-05 | |
| 5533-735 | MX2033-01-04-15-05 | |
| 685B0001A10 | 440DR-2044-0220 | |
| 74712-01-11-02-00 | 5485c | need to take exception to sensitivity and cable location on top. |
| 74712-06-05-03-00 | 5485c | need to take exception to sensitivity and cable location on top. |
| 1900/65-02-01-01-00 | DATAWATCH IX | exception to the input not being dynamic but 4-20mA |
| 177228-158 | 5485C-002 | will need to replace the cable |
| CMSS530-100A-MR-ISO | 5534-135-0-28-100 | 0 - 1.0 ips, rms 10 Hz- 1 kHz İnput: 100 mV/g İnput |
| CMSS590-100A | 5534-102-0-79-100 | 0 - 10 g, pk, 500 Hz- 10 kHz İnput: 100 mV/g İnput |
| TM0105-01-40-95-05-02 | MX2030-01-040-095-05-05 and MX2031-045-00-05 or MX2031-085-00-05 | this is a set of probe and cable |
| TR4101-00-06-00-00 | MX2034-01-02-05-00-01-005 | this goes with the TM0105 |
| TR4101-00-07-00-00 | MX2034-01-02-09-00-01-005 | this goes with the TM0105 |
| 84661-15 | 9334-211-0040-0045 | VIB SEN EXT CABLE 4,575mm EX-I |
| 990-05-xx-03-05 | MX2034-01-09-09-05-01-003 | TightView series |
