SLM6060, SLM6060,PROTON Vietnam, InteliSENS SLM PROTON Vietnam, Thiết bị đo chiều dài Proton VIETNAM
Hãng sản xuất: PROTON VIETNAM
Mr. TúFeatures
- Non-contact, high-speed, solid-state laser speed and length measurement with no slippage, drift or mechanical wear and greatly reduced maintenance compared with contact wheel / roller systems.
- Unidirectional speed and length measurement.
- UKAS-traceable calibration; accuracy better than 0.05% and repeatability better than 0.02%.
- Rugged industrial design for use in harsh factory environments.
- Available fitted with industry-standard communcations interfaces for easy integration with PLCs and production line equipment.
- Excellent value with low cost of ownership.
- Harsh environment enclosures are available from Proton Products on request.
Accessories
Click here for information on accessories for the InteliSENS® SLM Series of laser speed and length gauges.
CHOOSE ACCESSORIES
Introduction
Proton Products InteliSENS® SLM Series non-contact, unidirectional speed and length gauges provide extremely accurate speed and length measurements for metals industry applications. They are available with extended stand-off distances and greater depth-of-fields than the standard InteliSENS® SL Series gauges, which allows them to be used to measure very high temperature objects such as in hot-rolling processes.
Applications requiring a precise cut-to-length process benefit from the non-slip and highly accurate laser measurement technique which reduces scrap, increases uptime and improves material yield by eliminating product “Give Away” or “Short Length” claims.
InteliSENS® SLM Series gauges are money-saving, direct replacements for traditional problematic and high-maintenance contact wheel and roller-type devices and are extremely easy to install and operate. Integration with production line controllers such as PLCs is eased by the availability of a wide variety of industry standard communications interfaces.
Operating principle – Laser surface velocimeter
Proton Products InteliSENS® SLM series speed and length gauges illuminate the measured surface with an interference pattern created by the intersection of two laser beams. The alternating bright and dark interference fringes modulate the light scattered by the object with a frequency proportional to the object speed. This scattered light is detected by a photodiode and the electrical signal digitally processed to determine the frequency and hence the speed. Object length is then calculated by integrating the speed measurement over time.
Specifications
| Model | SLM6060 | SLM120120 | SLM200200 | Units |
|---|---|---|---|---|
| Stand-off distance* | 600 | 1200 | 2000 | mm |
| 23.6 | 47.2 | 78.7 | inch | |
| Depth-of-field | 60 | 120 | 200 | mm |
| 2.36 | 4.72 | 7.87 | inch | |
| Minimum speed | 0.2 | 0.4 | 0.8 | m/min |
| 0.6 | 1.2 | 2.4 | ft/min | |
| Maximum speed | 5000 | 10000 | 10000 | m/min |
| 16400 | 32800 | 32800 | ft/min | |
| Weight | 3 | 4.5 | kg | |
| 6.6 | 9.9 | lb | ||
| Length | 230 | 317 | mm | |
| 9.06 | 12.48 | inch | ||
| Width | 130 | mm | ||
| 5.12 | inch | |||
| Height | 75 | mm | ||
| 2.95 | inch | |||
*Other stand-off distances are available on request.
| Specification | Minimum | Typical | Maximum | Units |
|---|---|---|---|---|
| Accuracy* | 0.05 | % | ||
| Repeatability | 0.02 | % | ||
| Acceleration | 500 | m/s2 | ||
| Internal measurement rate | 100 | kHz | ||
| Measurement output interval | 40 | µs | ||
| Laser spot size | 3 | mm | ||
| Operating temperature | 5 | 45 | °C | |
| 41 | 113 | °F | ||
| Environmental protection | IP67 | |||
| Power supply | 15 | 24 | 25 | VDC |
| Power consumption | 20 | W |
*only valid if the measured object is positioned within the central 20% of the depth-of-field.
| Measurement units (end-user configurable) | Speed | metres/minute | feet/minute | ||
| Length | metres | feet | yards | ||
| Laser safety control inputs | Laser | External closed contact enables laser diode. | |||
| Shutter | External closed contact opens laser shutter. | ||||
| 2×Logic inputs (end-user configurable) | Electrical | Maximum input voltage: +24Vdc | |||
| Function | Length reset | Display hold | Length hold | ||
| Speed hold | Direction | Pause | |||
| 3×Relay outputs (end-user configurable) | Electrical | Isolated, floating relay contacts | |||
| Maximum voltage: 50Vdc | Maximum current: 0.5A | ||||
| Function | Gauge OK | Laser at temp | Shutter open | Laser on | |
| Measuring | Preset Length 1 | Preset Length 2 | |||
| 3×Pulse outputs (end-user configurable) | Electrical | Opto-isolated differential pairs | |||
| Output voltage: 5V or user supplied (up to 24V) | |||||
| Maximum frequency: 250kHz | |||||
| Function | Quadrature | Index | |||
| Analogue output (end-user configurable) | Electrical | Output voltage: 0 to +10V (end-user scalable) | |||
| Function | Speed | Good readings | |||
| CANbus communications | Connects to an optional Proton Products AiG2 interface display unit | ||||
| Serial communications | RS-232 | RS-422 / 485 | |||
| Optional communications (factory-installed, choice of one) | PROFIBUS | Ethernet/IP | DeviceNET | ||
| Optional wireless communications (factory-installed, choice of one) | WiFi | Bluetooth | |||
