Flange load cell PD 21 Erhardt-Leimer Việt Nam
Xuất sứ: Germany
Nhà cung cấp: Pitesco
Hãng sản xuất: Erhardt-Leimer
Mr. Tú| Xem thêm thiết bị Tại đây |
PRODUCT DESCRIPTION
- Position-independent installation due to various mounting options such as flange bearings, pedestal bearings, inner or outer fastening
- Maximum operational reliability due to overload protection up to 20 times the nominal measuring force
- Different shaft diameters from 12 to 65 mm and nominal measuring forces from 0.05 to 10 kN ensure a high degree of flexibility
- In case of horizontal measuring direction, no influence on the measuring result due to the weight of the roller
- Good temperature behavior and a high degree of linearity of the measuring elements due to strain gauge application on a flat surface
TECHNICAL SPECIFICATIONS
| Accuracy class | 0,5 |
| Nominal characteristic (Sensitivity) | 1 m V/V |
| Combined error | < 0.5% |
| Characteristic value tolerance | 0.2% |
| Measuring principle | Full bridge strain gauge |
| Nominal resistance of the bridge strain gauge | 700 Ohm |
| Bridge supply voltage, nominal value | 10 V |
| Bridge supply voltage, max. permissible value | 14 V |
| Mechanical stop | 1.8 to 2.4 FN dep. on type |
| Operating load | 1.8 to 2.4 FN |
| Limit load | 20xFN |
| Nominal measuring travel | 0.1 to 0.2 mm depending on type |
| Nominal temperature range | -10 °C to +60 °C |
| Operating temperature range | -10 °C to +90 °C |
| Temperature coefficient | ±0.3% / 10 K (characteristic value) ± 0.3% / 10 K (zero signal) |
| Protection class | IP 50 |
| Max. permissible axial transverse force | 1xFN |
| Weight | 2.3 kg (d1 = 17 mm), 3.6 kg (d1 = 25 mm), 8.5 kg (d1 = 35 mm) |
