avtron-xph8-smartsafe™-encoder-nidec-avtron-viet-nam.png

http://www.nidec-avtron.com/encoders/family/severe-mill-duty/xph8

Explosion Proof Bearingless Encoder

  • No Barrier or Isolator Needed
  • No Intrinsic Safety Ground Required
  • Class I Div 1 Groups C, D Listed
  • AEx Zone 1 Certified
  •  Zone 1 & 2 Certified
  • Fits Shafts Up to 4.5" [115mm]
  • Fully Protected Against Shorts and Wiring Errors
  • Adapters available to fit GEB20, 22, 28, GE 752 Motors
  • Wide Sensor-Rotor Gap:  No Shimming
  • Up 100000 PPR
  • -50°C to +85°C Operation
  • 2 Year No-Hassle Warranty
  • Outline Drawing
    XPH8 SMARTSafe™ encoders are the world's first explosion-proof encoders with removable electronics and no external barrier!  They are cULus, ATEX, AEx & IECEx certified and offer incredibly reliable no-bearing construction!  SMARTSafe XPH8 encoders can be used in ATEX/IECEx, cUL AEX, and UL gas hazardous environments.  Also available:  no-bearing modular sensors (XP5), as well as intrinsically safe models (XR5XR12XR56XR125XR485XR685XR850) and hollow shaft models M6C.

    For applications requiring ATEX/IECEx Zone 1 or 2 or cULus Class I, Division 1 or 2, Groups C & D use the XPH8 directly in your application with no barrier or isolator required.

    Unlike the competition, Avtron SMARTSafe encoder systems are protected against short circuits, power-to-output wiring, and output-to-ground faults.  They feature full diagnostics:  it's easy to determine that signal quality is good-just look for the green LED.  Worried about wiring short circuits and errors?  XPH8 will indicate any short circuit conditions with an orange LED and will survive this condition!

    No encoder bearing failures, no more sealing problems. Mount XPH8 directly on your motor.  Top drives, draw works, coil tubing, paint lines...so many applications benefit from a more reliable no-bearing encoder.  Vibration, shock, liquids, dust and dirt won't harm SMARTSafe XPH8 encoders!  

    Eliminate the biggest cause of hazardous duty encoder failure--eliminate the bearings with XPH8 hazardous duty encoders.