Model 4430 Deformation Meters (VW) Geokon Vietnam
Hãng sản xuất: Geokon
Mr. TúThe Model 4430 Deformation Meter with flanged ends is designed to measure longitudinal deformation in dams and embankments. It can also be grouted or held in place by hydraulic anchors to measure deformations in boreholes (over the gauge length). Gauge lengths from 0.5 to 100 meters are available.
Specifications
Standard Ranges¹
25, 50, 100, 150, 300 mm
Resolution²
0.025% F.S.
Accuracy³
±0.1% F.S.
Nonlinearity
<0.5% F.S.
Temperature Range¹
−20 °C to +80 °C
Length × Diameter
1 m (standard); varies × 27 mm (pipe), 51 mm (flange)
¹Other ranges available on request.
²Resolution depends on readout equipment.
³Transducer accuracy established under laboratory conditions.
